A pallet from a new supplier arrives at your warehouse. The cases carry the usual barcode and, next to it, a small square full of dots. Your warehouse clerk points the scan gun at it, the gun reads the bars and the square goes unread. Nobody worries: the barcode went in and the receipt was recorded.
What stayed in the square was the lot and expiration date of that case.
The 2027 goal
GS1 is the organization that manages the product numbers carried by retail barcodes. Industry, with GS1, has set a goal: by the end of 2027, checkouts around the world should be able to read the product number from both the usual barcodes and 2D codes, the square ones. In the United States, GS1 US calls it Sunrise 2027.
It is not a law or an official standard: it is an industry goal. GS1 US makes clear that you do not need every 2D capability in place by that date. But it does say what getting there takes: a software update for scanners and, if the scanner is not an imager, new equipment.
The 2D codes accepted at checkout are three: the QR Code with GS1 Digital Link syntax, the Data Matrix with that same syntax, and the GS1 DataMatrix.
The barcode is not going away
The GS1 guideline is clear: linear barcodes will not go away and will coexist with 2D codes for as long as there are uses for them. During the transition, the product carries both, side by side.
One number marks the end of that transition: until 90% of checkout scanning systems can read GS1 2D codes and at least capture the product number, every product with a 2D code must also carry the linear barcode.
That means nothing breaks on January 1, 2028. What changes is that more and more cases will carry that square, and what is inside it is only useful if your system knows how to read it.
What the square code carries
The usual barcode only says which product it is. A 2D code can also say which lot it belongs to, when it expires and what its serial number is. Each piece of data is marked with a GS1 prefix: (01) is the product number, (10) is the lot, (17) is the expiration date and (21) is the serial number.
It is the same data the FDA traceability rule asks for at every receipt. If the lot comes printed in a code that can be scanned, capturing it no longer depends on someone copying it by hand from the label.
But reading it is not enough. The lot has a variable length, and what marks where it ends is an invisible character GS1 calls FNC1. A system that takes the scan as if it were a single number does not know where the lot ends and the next piece of data begins.
Where it hits you, depending on what you do
If you sell over the counter, in a store in El Paso or Juárez, the question is for your point-of-sale provider. GS1 says the checkout must be able to read the product number from the three 2D codes and from all the existing linear ones. A laser scanner reads the bars, not the square; and even among imaging scanners, GS1 warns that not all of them will be able to. The checkout system may also need an update to understand what the scanner sends it.
If you manufacture or pack for US retailers, the first step GS1 US proposes is to add the 2D code to the packaging you already have. If it already carries a QR code that goes to your website, it has to move to GS1 Digital Link and include the product number, so the same QR code works at checkout. Then come the lot, the variants and the production or expiration dates. If you sell to a chain, ask whether it already has a date for asking you.
If you receive, store and ship goods, the GS1 guideline asks a question that falls on your system: are your receiving and back-office systems ready for the additional data? Distribution centers will also have to scan 2D codes to move product. And on the manufacturer’s side, the guideline describes how the warehouse system uses those codes to sort, ship and send the advance ship notice to the customer, the same one required by a customer who demands EDI.
What to do before 2027
- List your scanners: model, whether they are laser or imagers, and where in the operation they are used.
- Ask your provider, in writing, whether they read the three GS1 2D codes and what they send to your system: only the product number, or also the lot and expiration.
- Check whether your system has a place to store the lot and expiration of every case you receive, and whether anyone fills them in today.
- If you make your own products, talk to whoever designs and prints your labels before your next packaging change.
If the answer to the second question is “only the product number,” the square will keep going unread.
Where we come in
We build warehouse systems for companies of every kind in Juárez and El Paso that read the 2D code at receiving, separate the product number, the lot and the expiration date, and store them on every movement so they can be traced. They run on scanning terminals and on the scanners you already have, if they read 2D. If you want to know where to start, Chira asks you the questions and gives you in writing what to fix first. And if you would rather talk it through, book a call.
References
- 2D Barcodes at Retail Point-of-Sale Implementation Guideline, GS1, release 1.0, May 2024 — the goal of checkouts reading the product number from linear and 2D codes by the end of 2027, the software and equipment upgrades, the three 2D codes for checkout, coexistence with linear barcodes, the 90% threshold, the (01), (10), (17) and (21) prefixes, the FNC1 character, the warning that not all imaging scanners will be able to read them, the table of laser and imaging scanners, and what falls on receiving and warehouse systems.
- What is GS1 Sunrise 2027?, GS1 US — the Sunrise 2027 name, that not every 2D capability is needed by that date, and the first steps for brands and retailers.
- 2D Barcodes, GS1 US — that the UPC barcode is not going away and that during the transition the product may carry both codes, and the data a GS1 DataMatrix carries.